HOT JOBS - for engineers
******************************************************************************************
AEROSPACE
****************************************************************************
MECHANICAL DESIGNER
Type: Long-term Contract, Full-time
Location: Northwest Washington
Requirements:
Aircraft interiors experienceCATIA v4 experience a must (5+ years)
Send resume to: matt.sawicki@thetalleygroup.com
***********************************************************************************************
RELIABILITY ENGINEER
Type: Contract, Full-time, Long-term
Location: Northwest Washington
Requirements:
Must be a U.S. Citizen5 + years experience with Part25 aircraft
Experience with PSSA, SSA, FTA and FMEA per ARP4761 and ARP4754
Experience with reliability prediction per RIAC 217Plus or equivalent system
Experience with Fault Tree Analysis software, CAFTA is preferred
Reliability prediction software experience, Relex experience is preferred
Strong interpersonal skills
Responsibilities:
Review designs in regard to reliability, maintainability, safety and human factors
Interact with certification processes
conduct reliability prediction analyses, maintainability analyses, failure mode effects analyses(FMEA), fault tree analysis (FTA), and data in support of preliminary system safety analysis (PSSA), system safety analysis (SSA), direct maintenance cost (DMC), MSG-3, CCMR, MMEL, logistic support and related documents.
Send Resume To: josh.bruner@thetalleygroup.com
******************************************************************************************
CERTIFICATION ENGINEER
Type: Direct Hire, Full-time
Location: Long Island, New York
Requirements:
Bachelors Degree in Electrical Engineering
5-7 yrs. experience with aerospace LED lighting systems for civilian aircraft.
Ability to read and interpret documents such as safety rules, operating/maintance instructions and procedure manuals
Demonstrated experience with qualification/certification
Experience with electromagnetic emissions, electromagnetic interference, environmental testing, failure test analysis is preferred.
Excellent communications skills
Excellent presentation skills. Must be able to interface with customers and engineering staff including overseeing the qualification testing of products to customer requirements.
Must be able to travel 20% of time domestic and internationally.
Responsibilities:
Assisting in the evaluation of customer qualification/certification requirements for full compliance and acceptance to aircraft industry standards.
Interfacing with engineering at early stages of design in order to incorporate customer needs and requirements into initial prototype.
Implementing changes and amendments to documentation based on customer needs and requirements.
Preparing all support testing equipment needed for the completion witnessing and full laboratory support of testing.
Review reports from labs to ensure needs of customers are met.
Developing test plans/procedures needed to carry out the qualification and certification of product to customers and FAA.
Overseeing testing and schedule to track and report on qualification progress and estimated time of completion.
Evaluating testing requirements and assist in troubleshooting, evaluation and corrective action of any test failures. Work with Design Engineers to mitigate qualifcation risks during development phase of product.
Generation of all support testing documentation for the completion and certification to FAA standards.
Send Resume To: josh.bruner@thetalleygroup.com
****************************************************************************************
MECHANICAL DESIGNER
Location: Washington State
Type: Long term Contract
Requirements:
Solidworks Experience (Min. 5 years).
Commercial aircraft design experience.
Galley and lavotory design experience.
Send resume to: matt.sawicki@thetalleygroup.com
***********************************************************************************************
LEAD STRESS ENGINEER
Location: Washington State
Duration: Long term assignments
Requirements:
15+ years stress engineering experience in the aerospace industry (interiors a plus).
BS in related engineering field
Send resume to: matt.sawicki@thetalleygroup.com
***********************************************************************************************
SILICON DERIVATIVES SCIENTIST
Location: Montana
Type: Direct Hire Position
Requirements:
MS and/or PHD in Physics or Chemistry
Reliability prediction software a mandatory skill Relex preferred.
Strong interpersonal skills are required.
Minimum of 5 years experiencd with Part 25 (civil transport) aircraft
Experience in MSG-3, CCMR and MMEL processes strongly preferred.
Exerience in human factors desirable.
Responsibilities:
This scientist will design, plant and conduct research and development activities to provide Siemens technology and know-how improvements that enhance our competitive advantage.
Conceive, plan, design and conduct experienmental programs to produce new technologies and know-how.
Prepare R&D Project Proposals, providing estimates of schedule and budget requirements as well as estimates of value to be obtained.
Act as Project Manager (when assigned) to lead R&D projects in accordance iwht established work processes.
Send resume to: matt.sawicki@thetalleygroup.com
************************************************************************************************
QUALITY ENGINEER
Location: Western Washington State
Type: Direct Hire
Requirements:
B.S. Engineering Degree (Metallurgical, Electrical, Quality or Mechanical) or equivalent.
Three years experience in Quality Control in a manufacturing environment.
General understanding of Quality Assurance Systems and Applications; such as ISO 9000/AS 9100.
Aerospace experience a plus.
Send resume to: resume@thetalleygroup.com
***********************************************************************************************
SR. QUALITY ENGINEER
Location: Western Washington
Type: Direct Hire
Requirements:
B.S. Engineering Degree (Metallurgical, Electrical, Quality or Mechanical) or equivalent.
Eight years experience in Quality Control in a manufacturing environment.
General understanding of Quality Assurance Systems and Applications; such as ISO 9000/AS 9100.
Aerospace experience a plus.
Send resume to: resume@thetalleygroup.com
************************************************************************************************
CIVIL ENGINEERING
********************************************************************************************************************************
CIVIL ENGINEER
Type: Contract
Location: Northwest Washington
Requirements:
Minimum 5 years experience in performing design for heavy industrial applications such as chemical facilities and oil refineries
Proficiency in AutoCAd
Proficiency in Autodesk Inventor
Algor FEA Analysis experience required
Experience in the design of reinforced concrete foundations
Experience in the design of storage vessels using ASCE 7 is desired
Send Resume To: josh.bruner@thetalleygroup.com
*****************************************************************************************************************************
OIL AND GAS ENGINEERING
*****************************************************************************************************************************
PIPING DESIGNER/DRAFTER
Type: Long-term Contract, Full-time
Location: Northwest Washington
Requirements:
3 + years experience in piping and vessel design for Industrial Chemical Processing facilities or Refineries.
Demonstrated high level of proficiency with AutoCAD
Proficiency in Autodesk Inventor
Ability to pass a pre-employment drug screen
Ability to pass a pre-employment work eligibility screening.
Familiarity in process piping required
Familiarity in vessel design preferred
Send Resume To: josh.bruner@thetalleygroup.com
******************************************************************************************
NUCLEAR ENGINEERING
******************************************************************************************
ENVIRONMENTAL SCIENTIST
Type: Long-term Contract, Full-time
Location: Hanford Nuclear Site, Eastern Washington
Requirements:
B.S. in Geology, hydrogeology, hydrology, environmental science or related science field.
Experience in CERCLA and RCRA work, soil and groundwater remediation, at the Hanford Nuclear Reservation.
Good communication skills, both written and verbal
Responsibilities:
Provide technical support for CERCLA and RCRA projects.
On-going monitoring, data analysis and project reporting as required per RCRA
Assist in the creation of the final record of decision for all ground water operable units.
Perform data processing and apply technical analysis and evaluations for sampling, characterization, technology applications and other investigations.
Review, evaluate and report monitoring data collected during routine sampling for RCRA and CERCLA.
Write monitoring plans and assessment plans for RCRA TSDs and CERCLA operable units.
Support preparation of close out documents.
Assist in the generation of quarterly RCRA presentations.
Assist with CERCLA technical briefings as needed.
Send Resume To: josh.bruner@thetalleygroup.com
***********************************************************************************************
INDEPENDENT ASSESSMENT PROFESSIONAL
Location: Washington State (Eastern)
Type: Contract - Immediate start thru February 2012
Requirements:
BA/BS degree in an engineering discipline or a combination of education and experience
Experience in the nuclear field
Recent DOE site experience
Responsibilities:
Perform Conduct of Operations assessment
Facilitate focused training for bargaining unit and exempt personnel on the principles of Conduct of Operations
Participate in and provide insight for resolution of issues identified internally and externally in the Conduct of Operations arena
Assist in preparations for Readiness Assessments
Provide in -the-field mentoring of work crews.
Send resume to: matt.sawicki@thetalleygroup.com
*************************************************************************************************
SAFETY SPECIALIST
Type: Long-term Contract, Full-time
Location: Hanford Nuclear Reservation, Richland, WA
Requirements:
BS/BA in a related discipline, or a combination of education and experience with a minimum of 10 years occupational and safety /health experience.
Minimum 2 years experience in safety work at the Hanford Nuclear Reservation, Richland, WA.
Experience in soil and groundwater remediation, decommissioning and demolition of nuclear enrichment facilties, storage facilities, nuclear reactor, and support structures.
Experience in job hazard analysis process, developing safety awareness and worker protection programs.
Ability to meet the requirements of working in a hazard waste invironment, radiological environment, and able to wear respiratory equipment if needed.
Desired but not required:
Professional certification (eg. Certified Safety Professional (CSP)
2 + years experience working on a DOE or DOD project.
Responsibilities:
Respond to emerging programmatic and project related safety compliance issues.
Provide occupational safety interpretation and interface in contining job hazard analysis process.
Support conduct of operations work improvement initiatives.
Develop safety awareness and worker protection programs.
Provide on-site safety supervision and assessments of craft workers as needed.
Send Resume To: josh.bruner@thetalleygroup.com
********************************************************************************************
MECHANICAL DESIGNER
Location: Eastern Washington State
Type: Contract - Immediate start thru December 2010
Requirements:
AA degree or equivalent combination of education and experience.
Minum of 15 years experience in mechanical design.
Minimum of 15 years experience with Computer Aided Design (CAD).
10 years experience with Autodesk Inventor and/or Solidworks (3-D Modeling).
Send resume to: resume@thetalleygroup.com
**********************************************************************************************
MECHANICAL ENGINEER - NUCLEAR
Location: Eastern Washington State
Type: Contract - Estimated 6 month assignment
Requirements:
BS in Mechanical Engineering
Experience in mechanical system design
Experience in preparation of conceptual/preliminary/final design products.
Experience and or knowledge of Knock-Out-Pot Project and 100K Area Fuel Handling Systems within the 105KW and CVDF Facilities.
Experience working on the Hanford Site and working knowledge of the fuel handling processes within 105KW Facility
Send resume to: matt.sawicki@thetalleygroup.com
***********************************************************************************************
ENGINEERING LEAD
Location: Washington State (Eastern)
Type: Contract - Estimated 6 month assignment
Requirements:
BS in Mechanical Engineering or Chemical Engineering.
Experience in mechanical system design and preparation of conceptual/preliminary/final design products.
Proven experience in delivery of conceptual/preliminary/final design products within the DOE Complex.
Experience and or knowledge of Knock-Out-Pot (KOP) Project and 100K Area Fuel Handling Systems within the 105KW and CVDF Facilities.
Must have experience working on the Hanford Site and have working knowledge of the fuel handling processes within 105KW Facility.
Responsibilities:
This person will be the primary point of contact between the engineering staff and interfacing functional organizations (regulatory compliance, nuclear safety, safeguards and security, radiation protection, etc..) as well as the conduit to the KOP Project Manager
Send resume to: josh.bruner@thetalleygroup.com
***********************************************************************************************
PLANNER SCHEDULER
Location: Eastern Washington State
Type: Contract - Immediate start thru September 2011
Requirements:
Minimum of 3-5 years related scheduling experience
Proficiency in Microsoft Word, Excel and Access
Ability to understand basic project management tools such as Gantt Charts and project schedules
Understanding and ability in explaining basic statistics and trending analysis
Degree or equivalent combination of education and experience in a nuclear facility.
Experience with the Hanford Job Control System
Responsibilities:
Perform scheduling activities for the Plutonium Finishing Plant.
Interface with Operations, Engineering, Maintenance and other project personnel to effectively schedule craft resources necessary to support operations, maintenance and D&D activities.
Send resume to: matt.sawicki@thetalleygroup.com
************************************************************************************************
OPERATIONS SPECIALIST
Location: Eastern Washington State
Type: Contract - Immediate start thru September 2011
Requirements:
BS Degree in Environmental Science, Environmental Engineering, Physical Science or similar technical discipline
10 years of directly applicable waste experience
Responsibilities:
Review work packages to ensure that waste disposition tasks are clearly/concisely annotated for satisfactory waste generation.
Ensure Automated Job Hazard analysis (AJHA) are reviewed and completed compliantly per the Work Management Process.
Ensure Waste Planning Checklists are completed accurately in accordance with the Work Management Process.
Provide input on PRF D&D walk downs in regard to waste generation and identification
Coordinate with Waste Management Respresentatives for completion for waste designations.
Initiate/complete waste identification reports for Project Management for incorporation into Project Management Planning and Waste Forecast.
Send Resume To: resume@thetalleygroup.com
***********************************************************************************************
***********************************************************************************************
